Maintenance Test Pilot

Overview

Responsible for conducting acceptance test flights, pre/post phase test flights, ground/flight maintenance operational checks, ground/flight evaluation and troubleshooting. Reports directly to the Maintenance Examiner, Maintenance Team Lead and Maintenance Manager to assist with: coordinating with Production Control for maintenance planning, schedules and unit (pilot and aircrew) support for maintenance operations when required.

Will also be responsible for

1.Must ensure that all aircraft inspection procedures, maintenance practices, standards, and records comply with all GCAA, FAA, EASA, Etc. TAMMS and the company's regulations.

2.Performs as MTP on the concerned aircraft and serves as Pilot in command (PIC/PC) in accomplishing Maintenance Test Flights, Acceptance Flights, Maintenance Operational Checks, Aircraft Recovery and support missions as prescribed by customer requirements.

3.Obtains briefing information on purpose of flight test, weather, operation procedures, intelligence, and special instructions. Prepare flight plans considering such factors as altitude, terrain, weather, aircraft, crew capabilities, threats, operational / training requirements and flight procedures.

4.Ensuring that all the concerned aircraft are being maintained to airworthiness standards prescribed by applicable regulations, technical manuals, airworthiness directives, and good maintenance practices.

5.Ensures the aircraft is pre-flight inspected, loaded, equipped, and manned for mission. Inspect engines, fuselage, and control surfaces for mechanical and structural soundness. Inspect and test mission equipment for proper operation. Ensures that weight and balance is valid, fuel supply is adequate, plus survival and rescue equipment is properly stowed.

6.Brief all crew members and non-crew members on safety, emergency procedures, and scope of mission. PIC and crew to accomplish assigned mission. Perform prescribed test maneuvers, instrument readings, record results and test specifications as prescribed by the contract or customer requirements.

7.Test both normal and emergency functions of standard and special systems. Coordinate and direct flight phases of test or support missions with other aircraft. Maintain flight records and report observations made during mission. Conduct and supervise training of crew members. Instruct local national crew members in the operation and techniques of maintenance test flying. Orient and brief crew members and non-crew members on duties, responsibilities, flight operation, and mission profile.

8.Advise on aircraft system faults/failures and subsequent required action for mission completion in real time.

9.Maintain proficiency and currency requirements to the highest standard.

10.Travel in/out of country on demand as requested by the customer.

11.Must be able to perform limited duties of technical inspector, inspecting maintenance, and modification actions on assigned aircraft.

12.Assist as needed, in troubleshooting and use of test equipment. Assist as needed with logistical issues to identify needed components or test equipment.

13.Must be able to work flexible hours as deemed necessary by the Maintenance Examiner, Operations Manager, Production Control Manager, Maintenance Team Lead and/or Maintenance Manager.

14.Perform other related tasks as assigned by your Line Manager.

Nationality

No Restriction

Qualification

-FAA, EASA, etc. or equivalent military training certificates. Military or commercial aircraft maintenance school or course required.

• Must be able to attain and maintain a local military flight physical (class I), equivalent to the FAA (class II).
• Must be able to pass hands-on flight evaluation.
• BA or BS is preferred.
• Maintenance Examiner (ME) is preferred.

Experience

-Minimum of 5 Years Aviation Maintenance

• Minimum 3000 hours Total Time, 1000 hours PIC/PC and 200 hours MTP in aircraft type required.
• Must be a aircraft type specific SME, having strong knowledge on systems, optional equipment, aerodynamics, required maintenance and post maintenance tasks.
• Must have strong knowledge of FAA, EASA, etc. and/or equivalent Aircraft Maintenance Program.
• Strong knowledge of Maintenance Manuals & Technical Publications usage and application.
• Strong knowledge of Production and Quality Control preferred