Duct Fabricator

Experience required on Pre Insulated duct fabrication.Job Types: Full-time, PermanentAbility to commute/relocate: Abu Dhabi: Reliably commute or planning to relocate before starting work (required)

Main Task & Duties1-Target Receiving orders from the production engineer Planning and arranging the orders as per the delivery commitment Checking the availability & collecting of raw material as per the material list in the store and auto fold operator Arrange the material (Plasma sheet, flange, corner, rivets) and tools on time to get the work done on...

SummaryTo carry out independently thermal and acoustic insulation including weather protection and cladding sheet fabrication (Lagger, Fitter and Fabricator). Knowledge of various types of insulation systems, carryout maintenance and new insulation of thermal and acoustic insulation for pipes and vessels. Applies insulation layers, vapor barrier mastic,...

Selects type of material according to product being fabricated, knowledge of duct materials and job standards and specifications and evaluation of sire workmanship. May do layout of fittings and duct, including manually locating and marking dimensions and reference lines on sheet metal, duct board, flex and duct pipe. May receive equipment/materials at site...

URGENTLY REQUIRED DUCTMAN WHO HAVE EXPERIENCE IN UAECarrying out ducting Installations as per approved drawings Following correct installation practices, Standards and safety Measures Carrying out installation right at the first time in order to avoid re-visiting the areas installed by completing Maintaining superior level of discipline at work Following...

Job descriptionAt Smart Seven MEP company of SST, we are looking for a Duct Installer & Fabricator, responsible for installing duct work, and installing air conditioning and ventilation equipment, designing and installing ducts and duct fittings, doing paperwork, adhering to company procedures.Responsibilities Carrying out ducting Installations as per...

Metal Worker: Manufacturing and installing various sheet metal products, such as air and heat ducts, sheet metal buildings and roofs Measuring, marking and laying out sheets of metal for specific jobs Operating tools that precisely cut, bend or straighten the metal sheets Polishing metal areas like rough surfaces or the seams and joints between two sheets of...

Preparation of layouts drawings. General Arrangement & Marking Scheme. o Fabrication details of Beams, Columns, V Brace Bracing etc. Single parts editing. Fabrication details of truss, purlins, ties sag rods, runners and stub column. o Fabrication details of duct and heater configurations. Floor Grating, Module type handrail detail & stairs, ladder. o Member...

HVAC Design Engineer Jobs In Abu Dhabi | Axxon HR SolutionsAbout the jobPerform Heat load calculation for Air Conditioning system for Oil Rigs, Jack up vessels, offshore Platforms, Barges, Ships, Exploration & Survey vessels etc.Involves selection of equipment (Split AC , Package A/C, Chiller, AHU, FCU, Ventilation fan, Pumps, etc.), design of ducting,...

We're looking for a motivated Ductman to join our growing team In this exciting role, you'll play a crucial part in fabricating and installing ductwork for HVAC systems across various job sites in the UAE.Responsibilities: Fabricate and install ductwork (PI, GI, SS, MS) according to approved drawings Ensure installations follow correct practices, industry...

Curtain Tailor: Experience in Curtains, Blinds, Upholstery and Tailoring Good Knowledge of Fabric and Curtain fittings Good Stitching experience Good fitting experience Can join immediatelyMetal Worker: Manufacturing and installing various sheet metal products, such as air and heat ducts, sheet metal buildings and roofs Measuring, marking and laying out...

For KA-BA-YANDUCTMAN - 4 Nos. ( Experience required on Pre Insulated duct fabrication) - AED 3000 to 3500DUCTMAN Supervisor - 1 No. AED 3500 to 4000Experience: 1-2 years' experience in the related feel is required.Skills: Excellent analytical skills and a knack of Data Analysis. Strong prioritization, organization and task management skills.Location of work:...

Title:Senior Mechanical Commissioning EngineerBelong, Connect, Grow, with KBR KBR is a company of innovators, thinkers, creators, explorers, volunteers, and dreamers and we all share one goal of improving the World and Beyond: responsibly, and safely. We attract a diverse workforce and the best minds in the world because our expertise thrives on creativity,...

Title:Senior Mechanical Commissioning EngineerBelong, Connect, Grow, with KBR KBR is a company of innovators, thinkers, creators, explorers, volunteers, and dreamers and we all share one goal of improving the World and Beyond: responsibly, and safely. We attract a diverse workforce and the best minds in the world because our expertise thrives on creativity,...

Petrofac is a leading international service provider to the energy industry, with a diverse client portfolio including many of the world's leading energy companies.We design, build, manage and maintain infrastructure for our clients.We recruit, reward, and develop our people based on merit regardless of race, nationality, religion, gender, age, sexual...

Emirates Electrical & Instrumentation Company LLC is a proud member of the Ghobash Group. For almost 20 years, we have made vital contributions to the Oil & Gas sector of the UAE, executing both onshore and offshore projects. Abu Dhabi National Oil Company (ADNOC) is one of our main clients along with Tier 1 and Tier 2 EPC contractors in this sector. We have...

Urgently Required Duct Fabricator for GI and PI and cladding for the duct and CHW pipe Line Must have Working Experience in UAE must be on visit or cancelled VISA Duct Fabrication whatapp on +971 54 5866 456 **Job Type**: Permanent **Salary**: AED1,300.00 - AED1,600.00 per month Ability to commute/relocate: - Abu Dhabi: Reliably commute or planning...

We have requirements for; HVAC Duct Fabricator - 5 Nos HVAC Duct Man - 5 Nos Salary : 1300 - 1800 AED per month Food, Accommodation and Transportation Provided. **Salary**: AED1,300.00 - AED1,800.00 per month

Worked and acquired qualification of 5 years experience in HVAC Duct Factory. - Knowledge in operating of Duct related machineries (Autoline/Plasma/Searing/Folding & etc... - Quantity take-off for design & material order. - Designing of Shop Drawing. - Experience in sales for HVAC Duct Supply. - Minimum Experience 5 years. - Knowledge of CAMDUCT...

**Main Task & Duties** **1-Target** - Receiving orders from the production engineer - Planning and arranging the orders as per the delivery commitment - Checking the availability & collecting of raw material as per the material list in the store and auto fold operator - Arrange the material (Plasma sheet, flange, corner, rivets) and tools on time to get the...

Duct Fabricator with min 2 years ofUAE experience **Salary**: AED800.00 - AED1,000.00 per month

At Smart Seven MEP company of SST, we are looking for a Duct Installer & Fabricator, responsible for installing duct work, and installing air conditioning and ventilation equipment, designing and installing ducts and duct fittings, doing paperwork, adhering to company procedures. **Responsibilities** - Carrying out ducting Installations as per approved...

This is journeyman level work in the fabrication of various types of insulating materials from fiberglass, foamglass, mineral fibers, synthetic rubber, and other products commonly used in the trade. Work involves installing insulation on steam, hot and chill water piping, refrigeration lines, and air conditioning ducts. Work also involves the proper...

Selects type of material according to product being fabricated, knowledge of duct materials and job standards and specifications and evaluation of sire workmanship. - May do layout of fittings and duct, including manually locating and marking dimensions and reference lines on sheet metal, duct board, flex and duct pipe. - May receive equipment/materials at...

Duct man - Duct Charge Hand - Plumber **Responsibilities-** - Fabricating and installing ductwork and other metal parts. - Reading and interpreting blueprints and HVAC plans. - Inspecting and repairing damaged duct systems. - Coordinating with clients and team members on installation plans. - Ensuring proper insulation and sealing of duct systems. **Salary...

URGENTLY REQUIRED DUCTMAN WHO HAVE EXPERIENCE IN UAE Carrying out ducting Installations as per approved drawings Following correct installation practices, Standards and safety Measures Carrying out installation right at the first time in order to avoid re-visiting the areas installed by completing Maintaining superior level of discipline at work Following...

**Job description** At Smart Seven MEP company of SST, we are looking for a Duct Installer & Fabricator, responsible for installing duct work, and installing air conditioning and ventilation equipment, designing and installing ducts and duct fittings, doing paperwork, adhering to company procedures. **Responsibilities** - Carrying out ducting Installations...

**4. Duct Fitter** **Responsibilities**: - Installing and maintaining ductwork for HVAC systems. - Reading and interpreting HVAC plans and specifications. - Fabricating and assembling duct components. - Collaborating with the team to ensure project goals are met. **Requirements**: - Proven experience as a Duct Fitter. - Knowledge of HVAC systems and...

**Metal Worker**: - Manufacturing and installing various sheet metal products, such as air and heat ducts, sheet metal buildings and roofs - Measuring, marking and laying out sheets of metal for specific jobs - Operating tools that precisely cut, bend or straighten the metal sheets - Polishing metal areas like rough surfaces or the seams and joints between...

Preparation of layouts drawings. General Arrangement & Marking Scheme. o Fabrication details of Beams, Columns, V Brace Bracing etc. Single parts editing. Fabrication details of truss, purlins, ties sag rods, runners and stub column. o Fabrication details of duct and heater configurations. Floor Grating, Module type handrail detail & stairs, ladder. o Member...

**Responsibilities**:* - Install, maintain, and repair HVAC duct systems according to specifications and building codes. - Fabricate ductwork using appropriate tools and materials. - Inspect duct systems for leaks, damage, or other issues. - Perform routine maintenance on ductwork, including cleaning and lubricating components. - Follow safety procedures and...

We're looking for a motivated Ductman to join our growing team! In this exciting role, you'll play a crucial part in fabricating and installing ductwork for HVAC systems across various job sites in the UAE. **Responsibilities**: - Fabricate and install ductwork (PI, GI, SS, MS) according to approved drawings - Ensure installations follow correct practices,...

HVAC Design Engineer Jobs In Abu Dhabi | Axxon HR SolutionsAbout the jobPerform Heat load calculation for Air Conditioning system for Oil Rigs, Jack up vessels, offshore Platforms, Barges, Ships, Exploration & Survey vessels etc.Involves selection of equipment (Split AC , Package A/C, Chiller, AHU, FCU, Ventilation fan, Pumps, etc.), design of ducting,...

HVAC Design Engineer Jobs In Abu Dhabi | Axxon HR SolutionsAbout the jobPerform Heat load calculation for Air Conditioning system for Oil Rigs, Jack up vessels, offshore Platforms, Barges, Ships, Exploration & Survey vessels etc.Involves selection of equipment (Split AC , Package A/C, Chiller, AHU, FCU, Ventilation fan, Pumps, etc.), design of ducting,...

For KA-BA-YAN DUCTMAN - 4 Nos. **( Experience required on Pre Insulated duct fabrication) - **AED 3000 to 3500 DUCTMAN Supervisor - 1 No. AED 3500 to 4000 Experience: 1-2 years’ experience in the related feel is required. Skills: Excellent analytical skills and a knack of Data Analysis. Strong prioritization, organization and task management...

**Curtain Tailor**: - Experience in Curtains, Blinds, Upholstery and Tailoring - Good Knowledge of Fabric and Curtain fittings - Good Stitching experience - Good fitting experience - Can join immediately **Metal Worker**: - Manufacturing and installing various sheet metal products, such as air and heat ducts, sheet metal buildings and roofs - Measuring,...