Aircraft Components Engineer I

Found in: beBee S AE - 4 weeks ago

United Arab Emirates Emirates Engineering Full time
To carry out routine maintenance tasks and defect rectification of aircraft components as per company and associated regulatory procedures.

Job Outline:
- GENERIC
- Carry out aircraft components maintenance and servicing tasks in compliance with manufacturer and safety procedures. Ensure that assigned aircraft components are maintained as per latest revisions of approved authority Technical Publications such as CMM, Aircraft documentation, Technical Notices, Quality Notices, and Engineering Procedures Manual etc. Ensure that personal approvals/licences are valid and applicable to aircraft components type/scope.
- Determine if tooling/equipment used is serviceable and appropriate for the task and use specialised tooling where required. Ensure that trouble shooting procedures/tools used for fault rectification are carried out in a cost effective and efficient manner.
- Ensure that all activities performed are carried out in accordance with all safety rules and regulations and in adherence to company procedures, highlighting a deficiencies/requirements through the effective use of reporting tools. Ensure all work locations are kept clean and excellent housekeeping conditions are maintained.
- Maintain effective communication with Colleagues including Managers and Senior Engineers to ensure a seamless flow of information and to highlight any potential operational issues.
- Manage the performance of staff using performance review process and system. Ensure SMART goal setting, interim/annual reviews and development plans are in place for assigned staff members in accordance with company procedures.
- Attend training/recurrent modules as required to enhance skills and comply with CAR 145 requirements.
- Ensure resources and manpower available is support of the business needs allowing targets/milestones to be adequately achieved. Ensure that available resources are utilized fully to meet the business needs. Ensure for all staff allocated to him/her and themselves to efficiently clock on/clock off job cards in the process of performing their usual duties. Must be available to assume duties and responsibilities of shift manager/senior engineer shift whenever delegated by the section manager.
- Specific Functions for Airframe Components:
- Proactively identify New Capabilities build-up opportunities of aircraft components and conduct feasibility study, justify the requirement of establishing New Capabilities via Research and Development (R&D), Cost Benefit Analysis (Business Cases) to enhance the work shop\'s capabilities. Be conversant with 145 AMO regulatory framework. Liaise with company internal Compliance Monitoring teams for obtaining necessary Regulatory approvals for shop activities.
- Lead the project to build up the agreed new aircraft components capabilities until it is approved by regulatory. Liaise with Fleet Technical Management (Engineering Technical Services - ETS), Part 21 DOA, UAE GCAA MOA (Manufacturing Organization), Component Repair or Reliability Departments for gathering facts and solid justification data for the capability establishment. Define new Standard Operating Procedures (SOP) or Process Instruction Manuals / Stage Sheets / Work Order Job Cards that allows shop engineers to practice new capability deliverables. Develop and deliver training programs to enhance the technical proficiency of the Work Shop\'s staff. Introduce external training / refresher training to allow Authorization approval scopes of certifying engineers remain valid. Liaise with Technical Publications, ETS and ensure all Work Shop publications (CMM, CMM-TR, SILs, CMM-ICA documents) are available for Work Shop Personnel access.
- Coordinate with internal related stake holders to implement the built/approved new capabilities in the workshop until the output of production is fully compliance with regulations. Participate in company internal compliance monitoring 145 Audits, external EASA 145 or GCAA CAR 145 Audits and demonstrate work shop regulatory compliance at all times.
- To be involved in any potential optimization and/or continually improvement if it\'s applicable for the newly built-up capabilities
- Specific Functions for Avionics Components:
- Effectively participate in New Capabilities build-up opportunities of aircraft components and work with stakeholders to assist in the conduct of feasibility study to justify the requirement of establishing New Capabilities via Research and Development (R&D), Cost Benefit Analysis (Business Cases) to enhance the workshop\'s capabilities. Be conversant with 145 AMO regulatory framework.
- Lead the project to build up the agreed new aircraft components capabilities until it is approved by regulatory. Define new Standard Operating Procedures (SOP) or Process Instruction Manuals / Stage Sheets / Work Order Job Cards that allow shop engineers to practice new capability deliverables. Develop and deliver training programs to enhance the technical proficiency of the Workshop\'s staff.
- Coordinate with internal related stake holders to implement the built/approved new capabilities in the workshop until the output of production is fully compliance with regulations. Participate in company internal compliance monitoring 145 Audits, external EASA 145 or GCAA CAR 145 Audits and demonstrate workshop regulatory compliance at all times.

- Experience in Engineering Workshops 12+ Years
Degree or Honours (12+3 or equivalent)
Degree in Aeronautical subjects/Mechanical/Avionics/Electronic/Tech Engineering OR Aircraft Maintenance Engineering Licence OR Engineering Apprenticeship.
Experience in Aircraft Maintenance Engineering related fields.
- 7+ Years as a certifying staff in the relevant area Specific Qualifications/ Experience: Avionics/Structures/Cabin Shops: 7+years of EASA Form1/GCAA AW1 certification experience.
- Generic Knowledge/skills: - Fully conversant with Air Legislation and legal matters that relate to the operation and maintenance of aircraft to international standards.
- Airframe Components:
- Capable of Auto CAD, Solid Works, CATIA V5 or similar CAD/CAM packages. Ability to produce own
CAD drawings when need arises.
- 5+ years experience in MRO 145 work shop engineering streams as a subject matter expert of
Airframe Mechanical Systems (Hydraulic Components/Pneumatic Components/Landing Gears).
Experience in FTM is preferred.
- 3+ years experience with relative training on EASA Part 21.J DOA or Part 21.G POA
- Project management experiences with 6 Sigma/Lean/Aircraft Component capability build up
familiarization with PMP, Prince 2, Agile or Lean process engineering systems.
- Knowledge of latest technical developments and industry trends on respective technology Example:
3D printing, Additive Manufacturing etc.
- Ability to analyse and synthesise technical information for implementation in cost effective ways
- Excellent drafting/report writing skills
- Demonstrable experience in managing complex tasks and decision making in a fast-paced
environment

Join us in a management role and enjoy an attractive tax-free salary. On top of our generous travel benefits, including discounted flights and hotel stays around the world, this managerial role also has an excellent leave and healthcare package. That\xe2\x80\x99s on top of transport benefits, life insurance and more. Find out what it\xe2\x80\x99s like to live and work in our fast-paced, cosmopolitan home city in the Dubai Lifestyle section of our website www.emirates.com/careers

Emirates Engineering

  • Aircraft Technician Avionics Workshop

    Found in: beBee S AE - 4 weeks ago

    United Arab Emirates Emirates Engineering Full time

    Responsible for carrying out maintenance tasks on Emirates and third party aircraft components in accordance with company procedures and regulations. The Aircraft Technician works as part of a team under the direction and guidance of the assigned Licensed Aircraft Engineer within the appropriate trade/cross trade disciplines for which they have been...

  • Lead Aircraft Mechanic

    Found in: beBee S AE - 4 weeks ago

    United Arab Emirates Emirates Engineering Full time

    Responsible for carrying out maintenance tasks on Emirates and third party aircraft components in accordance with laid down procedures and regulations. The Lead Aircraft Mechanic will work as part of a team under the direction and guidance of the assigned Licensed Engineer within the trade disciplines for which they have been trained.Job Outline: - Carry out...

  • Aircraft Technician Structures Workshop

    Found in: beBee S AE - 4 weeks ago

    United Arab Emirates Emirates Engineering Full time

    Responsible for carrying out maintenance tasks on Emirates and third party aircraft components in accordance with company procedures and regulations. The Aircraft Technician works as part of a team under the direction and guidance of the assigned Licensed Aircraft Engineer within the appropriate trade/cross trade disciplines for which they have been...

  • Aircraft Technician

    Found in: beBee S AE - 4 weeks ago

    United Arab Emirates Emirates Engineering Full time

    Responsible for carrying out maintenance tasks on Emirates and third party aircraft components in accordance with company procedures and regulations. The Aircraft Technician works as part of a team under the direction and guidance of the assigned Licensed Aircraft Engineer within the appropriate trade/cross trade disciplines for which they have been trained...

  • Ndt Aircraft Technician Ndt Workshop

    Found in: beBee S AE - 4 weeks ago

    United Arab Emirates Emirates Engineering Full time

    Responsible for carrying out maintenance tasks on Emirates and third party aircraft components in accordance with company procedures and regulations. The Aircraft Technician works as part of a team under the direction and guidance of the assigned Licensed Aircraft Engineer within the appropriate trade/cross trade disciplines for which they have been...

  • Component Repairs Engineer Iii

    Found in: beBee S AE - 4 weeks ago

    United Arab Emirates Emirates Engineering Full time

    To plan and organise End to End processes of unserviceable parts inspection and dispositions, component cost of ownership, engine wing to wing management and in-house capability developments, to deliver efficient operational support to aircraft maintenance at optimal cost.Job Outline: Plan, organise and support respective teams on all topics relating to...

  • Aircraft Technician Cabin Workshop U.a.e National Only

    Found in: beBee S AE - 4 weeks ago

    United Arab Emirates Emirates Engineering Full time

    Responsible for carrying out maintenance tasks on Emirates and third party aircraft components in accordance with company procedures and regulations. The Aircraft Technician works as part of a team under the direction and guidance of the assigned Licensed Aircraft Engineer within the appropriate trade/cross trade disciplines for which they have been...

  • Lead Aircraft Mechanic Avionics Workshop

    Found in: beBee S AE - 4 weeks ago

    United Arab Emirates Emirates Engineering Full time

    Responsible for carrying out maintenance tasks on Emirates and third party aircraft components in accordance with laid down procedures and regulations. The Lead Aircraft Mechanic will work as part of a team under the direction and guidance of the assigned Licensed Engineer within the trade disciplines for which they have been trained.Job Outline: - GENERIC -...

  • Licensed Aircraft Engineer I Line Maintenance

    Found in: beBee S AE - 4 weeks ago

    United Arab Emirates Emirates Engineering Full time

    To carry out routine maintenance tasks and defect rectification of aircraft as per company and associated regulatory procedures. Engineering.Other : 10+ Years Degree or Honours (12+3 or equivalent) : Qualifications in Engg - Aeronautical subjects/Mechanical/Avionics/Electronic/Tech Engineering or Maintenance Engineering Licence. 5+ years experience in...

  • Technical Services Engineer I

    Found in: beBee S AE - 4 weeks ago

    United Arab Emirates Emirates Engineering Full time

    Job Purpose To provide fleet technical management, continuing airworthiness management and technical support functions for Emirates fleet to ensure compliance to regulatory & safety requirements, reliability, passenger comfort and cost effectiveness.Job Accountabilities - Provide fleet technical management, continuing airworthiness management and technical...

  • Licensed Aircraft Engineer Ii Aircraft Cabin Maintenance

    Found in: beBee S AE - 4 weeks ago

    United Arab Emirates Emirates Engineering Full time

    To carry out routine maintenance tasks and defect rectification of aircraft as per company and associated regulatory procedures. Engineering Maintenance Control : 8+ Years Degree or Honours (12+3 or equivalent) : Degree in Engg: - Aeronautical subjects/Mechanical/Avionics/Electronic/Tech Engineering or Maintenance Engineering Licence. 2+ Years as a...

  • Licensed Aircraft Engineer Iii Cabin

    Found in: beBee S AE - 4 weeks ago

    United Arab Emirates Emirates Engineering Full time

    To carry out routine maintenance tasks and defect rectification of aircraft as per company and associated regulatory procedures. Engineering.- Maintenance Control : Degree or Honours (12+3 or equivalent) : Qualifications: Degree in Engg - Aeronautical subjects/Mechanical/Avionics/Electronic/Tech Engineering or Maintenance Engineering Licence. 7+ years...

  • Technical Services Engineer Iii

    Found in: beBee S AE - 4 weeks ago

    United Arab Emirates Emirates Engineering Full time

    To provide fleet technical management, continuing airworthiness management and technical support functions for Emirates fleet to ensure compliance to regulatory & safety requirements, reliability, passenger comfort and cost effectiveness.Job Outline: Provide fleet technical management, continuing airworthiness management and technical support functions for...

  • Junior Engineering Maintenance Assistant

    Found in: beBee S AE - 4 weeks ago

    United Arab Emirates Emirates Engineering Full time

    To assist aircraft technicians in carrying out maintenance activities on Emirates fleet and third party a/c and components in accordance with laid down procedures and regulations. The role holder will form part of a team reporting to an LAE and will always work under the supervision of a senior staff.Job Outline: - Under supervision will perform cleaning of...

  • Engine Overhaul Technician Eemc

    Found in: beBee S AE - 4 weeks ago

    United Arab Emirates Emirates Engineering Full time

    To mentor mechanics and carry out Assembly, Disassembly, Cleaning, Inspection, Repairs, Refurbishment, Testing, Troubleshooting, modifications and rectification on all types of aircraft engines, engine systems, engine components to a high standard at the EEMC, to hold approval to certify own tasks in accordance with Airworthiness requirements of Original...

  • Engine Overhaul Engineer Iii

    Found in: beBee S AE - 4 weeks ago

    United Arab Emirates Emirates Engineering Full time

    To supervise and mentor Senior Technicians, Technicians and Mechanics to carry out Assembly, Disassembly, Cleaning, Inspection, Repairs, refurbishment, modifications, testing and rectification on all types of aircraft engines, engine systems, engine components to a high standard at the EEMC, to hold approval to certify own tasks as well as those directly...

  • QC Engineer

    Found in: Whatjobs AE C2 - 2 weeks ago

    united arab emirates INTECH Process Automation Full time

    Description We are seeking a highly motivated and experienced QC Engineer – Electrical & Instrumentation who will be responsible for but not limited to ensure that all Electrical Installation and Instrumentation related activities are executed safely, effectively, and efficiently in accordance with applicable technical requirements, company policies and...

  • Engine Overhaul Technician

    Found in: beBee S AE - 4 weeks ago

    United Arab Emirates Emirates Engineering Full time

    To mentor mechanics and carry out Assembly, Disassembly, Cleaning, Inspection, Repairs, Refurbishment, Testing, Troubleshooting, modifications and rectification on all types of aircraft engines, engine systems, engine components to a high standard at the EEMC, to hold approval to certify own tasks in accordance with Airworthiness requirements of Original...

  • Product Designer I

    Found in: beBee S AE - 4 weeks ago

    United Arab Emirates Talabat Full time

    Role summary We are on a mission to become one of the strongest \xe2\x80\x9cExperience first\xe2\x80\x9d companies in the region, and we need a Product Designer I to champion the cause. As a Product Designer, you\xe2\x80\x99ll join our passionate, fast-paced Design System team and help create a modular, inclusive system of patterns and guidelines which...

  • Ground Support Equipment Supervisor

    Found in: beBee S AE - 4 weeks ago

    United Arab Emirates Emirates Engineering Full time

    To organise & deliver Ground Support Equipment (GSE) onsite support to all scheduled and un-scheduled aircraft maintenance activities in accordance with customer (Base Maintenance, Line Maintenance and other aircraft maintenance departments including third party airlines) requirements. Assist & contribute in updating GSE procedures, in order to improve on...